NAS Codex: NAS error messages, explained from the vendor's own documents
Each page takes one exact message, status or light from a NAS, says what the vendor documents it to mean, and gives the vendor's own steps in a safe order. Every page links the vendor pages it was written from. Backups come first on every page.
Synology
- Synology drive status "System Partition Failed": degraded vs crashed system partitionSynology drive shows "System Partition Failed"? What a degraded vs crashed system partition means, the Repair link, and when a Mode 2 reset is needed.
- Synology volume crashed: Synology's four scenarios and what you can still doSynology volume crashed? Synology says a crash from drive or file system errors can't be repaired. 4 scenarios: won't boot, can't read, can read, drive pulled.
- Synology storage pool "Degraded": how Synology says to repair itSynology storage pool Degraded? What Synology says it means, replacement drive size rules for RAID and SHR, DSM 7 Repair steps, and why repair can be slow.
- Synology drive allocation status "Not Initialized": what it means and what to doSynology drive shows "Not Initialized"? Synology says DSM is not on it. When that is normal (new drive), when it is not, and Online Assemble for moved drives.
- Synology "Number of bad sectors increased": is the drive failing?Synology warns the bad sector count increased? Where to read the Bad sector count graph, when Synology says a rising count means replace, and its swap steps.
- Synology drive status Warning, Critical, Failing or Access Error: what each meansSynology drive in Warning, Critical, Failing or Access Error status? Synology's definition of each health status, how to inspect the drive, and what to do next.
- Synology STATUS or ALERT LED orange (blinking or static): what it meansSynology STATUS LED blinking or static orange? Its LED tables by DSM version, what orange means once DSM is ready, and what to check in Synology Assistant.
- Synology NAS keeps beeping: find the "Reason for current beep" and stop it safelySynology NAS keeps beeping? Where DSM shows the Reason for current beep, Synology's fix for a degraded or crashed volume, SSD cache or fan, and how to mute it.
- Synology NAS won't boot and the Power LED keeps blinking: Synology's checksSynology Power LED keeps blinking and the NAS won't boot? Synology's 20-minute rule, the no-drives motherboard test, then drives, add-ons and power adapter.
- Synology Assistant shows "Configuration lost": find the cause before you reinstall DSMSynology Assistant says "Configuration lost"? Synology lists 5 causes, from a Mode 2 reset to a failing drive or RESET button. Check them before reinstalling.
- Synology NAS not found by find.synology.com or Synology Assistant: Synology's checksCan't find your Synology NAS on the local network? Synology's order: Power LED, LAN lights, PING, Web Assistant and Synology Assistant, then a Mode 1 reset.
- Synology DSM or package update fails with an insufficient system capacity errorSynology update fails with insufficient system capacity? Why Storage Manager's free space doesn't count, what fills the system partition, and safe fixes.
- Synology installed drives not showing in Storage Manager: what to checkInstalled drives missing from Synology Storage Manager? Synology's checks in order: compatibility list, other slots, a computer, then Synology Assistant.
- Synology NAS cannot enter "Ready" status after installing drives: Synology's drive-by-drive checkSynology NAS powers on but never reaches Ready in Synology Assistant? Synology's fix: test each drive alone in the Drive 1 slot, then reassemble the pool.
- Synology SSD cache Crashed, Degraded or Missing: Synology's steps by cache typeSynology SSD cache shows Crashed, Degraded or missing? What Synology says to do for read-only and read-write caches, and why the volume status decides it.
- Synology keeps sending "Improper shutdown" notifications: how Synology says to find the causeGetting Synology "Improper shutdown" notifications? Synology's checks: rule out outside power, then test the power supply and run the memory test three times.
- Synology volume has become read-only: the two causes Synology gives and how it says to fix eachSynology volume turned read-only? Synology names two causes: unsupported features or failing hardware. Its fix for each, including backing up and recreating.
- Synology NAS making unusual noises: how Synology says to find the source and quiet itSynology NAS making odd noises? Synology's test to tell drive noise from fan noise, its fix for each, the DSM Fan Speed Modes, and when to ask for RMA service.
- Synology Storage Manager shows more storage used than your files add up to: how Synology says to find itSynology volume fuller than your shared folders explain? Synology's checks: Usage Details, the services that hold space, snapshots, Recycle Bins, du over SSH.
- Synology NAS won't hibernate or keeps waking up: what Synology says stops itSynology NAS never hibernates or keeps waking? Synology's list of the volume states, services and packages that stop it, and its two other power-saving options.
- Synology NAS CPU usage is high: how Synology says to find the process and bring it downSynology Resource Monitor shows high CPU? Find the process in Task Manager, then use Synology's fixes for SMB, Surveillance Station, indexing and backups.
- Synology Hyper Backup task in restore-only state after an integrity check: what Synology saysHyper Backup task restore-only after an integrity check? Synology: backups stop, versions can't be deleted. What causes it, scheduled checks, partial restores.
- Can't access a Synology shared folder via SMB: what Synology says to checkSynology shared folder won't open over SMB? Synology checks: firewall ports, SMB privileges, auto block list, SMB versions, saved credentials, NTLMv1, error 53.
- Forgot your Synology DSM administrator password: what Synology says to doForgot the Synology DSM admin password? Synology: hold RESET about 4 seconds to the beep (Mode 1), sign in as admin, blank password, set a new one. Data stays.
- Can't connect to your Synology NAS via QuickConnect: what Synology says to checkSynology QuickConnect not connecting? Synology: check Service Status and your Synology Account, then DHCP, DNS 8.8.8.8, IPv6 off, firewall off, MTU, NTP, relay.
- Time Machine backup to a Synology NAS failed: what Synology says to checkTime Machine to your Synology failing? Synology: SMB3 with oplocks, SMB2 lease and durable handles, Bonjour broadcast, no recycle bin, a quota, then the Mac.
- Synology NAS unresponsive, frozen or restarting on its own: what Synology says to checkSynology NAS frozen or restarting by itself? Synology: check the cable, test the power button, run a memory test three times, check pools and drives.
- DSM update not showing up or failing to download: what Synology saysDSM update not showing, or 'connection failed'? Synology: staged rollout and Smart Update; check DNS, proxy, IPv6, firewall and NTP; or update manually.
- Setting up a UPS so your Synology NAS shuts down safely: what Synology saysSynology UPS setup: enable UPS support, choose when Standby Mode starts, turn on auto-restart, test by unplugging the UPS. Plus sizing and sharing a UPS.
- Recovering files you accidentally deleted from a Synology NASDeleted a file on your Synology NAS? Synology says restore it from the #recycle folder in File Station, or from a snapshot or backup if Recycle Bin was off.
- Synology NAS file transfers are slow: Synology's checklistSlow transfers to a Synology NAS? Synology: test another PC, use a direct wired cable, match MTU, check the storage pool and drives, then tune SMB settings.
- Your Synology NAS was attacked by ransomware: what Synology says to doSynology NAS hit by ransomware? Synology: isolate it from the network, restore from backups or snapshots, find how it got in, then lock down access.
- Expanding a Synology storage pool: adding drives or replacing them with larger onesNeed more space on a Synology NAS? Synology: add drives to empty bays, or replace drives with larger ones one at a time, smallest first. Here is the order.
- USB or external drive not detected or not working on a Synology NASUSB drive not working on a Synology NAS? Synology: check External Devices, the file system, the size limit, restart with the drive out, then try other ports.
- Synology NAS email notifications not working: how Synology says to set them upSynology NAS not sending alert emails? Synology: set a sender and recipient in Notification > Email, use an App Password for Gmail SMTP, send a test email.
- Can't sign in to a Synology NAS: IP address blocked and other login errorsCan't sign in to Synology DSM? What each login error means, including "This IP address has been blocked", and how Synology says to lift the block.
- Synology Drive not syncing: files skipped, errors and connection failuresSynology Drive not syncing? Synology: check the client Logs, sync rules, file names and attributes, permissions and quota, and port 6690 for connections.
- Synology can't take snapshots: what Snapshot Replication requiresCan't take snapshots on Synology? It needs a Btrfs volume (or a thin LUN), 100 MB free for a folder snapshot and 1 GB for a LUN; recreate abnormal tasks.
- Synology Package Center "Connection failed", or a package won't installSynology Package Center says Connection failed? Synology: check network and DNS, sync time with NTP, unblock its sites, then repair or reinstall the package.
- Synology Wake on LAN not working: what Synology requiresSynology Wake on LAN not working? Synology: enable WOL per LAN port, shut down properly with power connected, avoid 10GbE ports, use a magic-packet switch.
- Synology time sync not working: NTP status abnormal or clock wrongSynology NTP sync abnormal or clock wrong? Synology: click Update Now, try another server or its IP, check DNS, and make sure firewall port 123 is not blocked.
- Synology Photos thumbnails not showing: HEIC and HEVC files, and indexingHEIC photos or HEVC videos not showing in Synology Photos? Synology moved that processing to devices; use Synology Image Assistant, and check media indexing.
- Synology encrypted shared folder missing or not mountedSynology encrypted shared folder gone after a restart, or Key Manager passphrase forgotten? Synology explains mounting, Mount on Boot and the key file.
- Synology Let's Encrypt certificate won't register or renewSynology can't get or renew a Let's Encrypt certificate? Synology lists the causes: imported certificates, DNS records, port 80 and Synology DDNS status.
- Synology Hyper Backup: insufficient space at the backup destinationHyper Backup says the backup destination is out of space or quota? Synology says old versions are the usual cause; delete versions or expand the destination.
- Synology NFS share won't mount or shows permission deniedSynology NFS mount fails or you can't open files? Synology's fixes: enable NFS, add an NFS rule for the client, pick the right Squash option, match UIDs.
- Synology data scrubbing: how long it takes and why the NAS slows downSynology data scrubbing taking hours or days, or not available on a pool? How Synology estimates the time, which pools support it, and how to schedule it.
- Synology link aggregation doesn't make transfers fasterSet up link aggregation on your Synology NAS but one PC is no faster? Synology says bandwidth only grows with several clients; SMB3 Multichannel is for one.
- Can't connect to Synology VPN Server (L2TP/IPSec or OpenVPN)Can't connect to VPN Server on your Synology NAS? Synology's checks: ports, router forwarding, account privilege, client settings and the NAS firewall.
QNAP
- QNAP "Disk X: Medium error" in the system log: what it means and what to doQNAP log says "[Hardware Status] Disk X: Medium error."? What QNAP says it means, how to check Disk Health and run a S.M.A.R.T. test, and when to replace it.
- QNAP "[Disk S.M.A.R.T.] Disk x still has warning/error condition": what to doQNAP keeps logging "[Disk S.M.A.R.T.] Host: Disk x still has warning/error condition"? What Warning and Error health mean, and QNAP's disk replacement steps.
- QNAP disk status shows "Inactive" (or "Disk drive X failed or is unplugged")QNAP Storage & Snapshots shows a disk as Inactive? QNAP says the NAS cannot detect the disk in that bay. Its checks in a safe order, and when to replace it.
- QNAP "RAID group X is degraded, the RAID group has been set to read-only"QNAP shows "Warning (Degraded - Readonly)" and says to back up all files immediately? Why QNAP says not to replace a disk first, and the order it gives instead.
- QNAP RAID rebuild won't start after replacing a drive in a degraded poolReplaced a failed disk in a degraded QNAP pool and the rebuild never started? QNAP's Configure Spare Disk fix, drive checks first, and when it doesn't apply.
- QNAP firmware update error FW004: "A flash read/write error occurred"QNAP firmware update fails with "A flash read/write error occurred. Error code: FW004"? Which models and QTS versions QNAP lists, and its two-step update route.
- QNAP NAS won't boot after a QTS firmware updateQNAP NAS stuck after a firmware update? QNAP's test: remove the drives, boot again, and listen for the long beep within 4 minutes. What each result points to.
- QNAP status LED flashing red and green alternately: what it meansQNAP status LED flashing green and red alternately? QNAP says the NAS is busy: formatting, initializing, updating firmware or rebuilding RAID. Mostly, you wait.
- QNAP status LED red: flashing red vs solid red, and what each meansQNAP status LED red? Flashing red means degraded mode; solid red covers disk, volume, fan and self-test faults. QNAP's LED table and where to look for each.
- QNAP NAS can't be accessed and the status LED is flashing greenQNAP status LED flashing green and you can't reach the NAS? QNAP's three steps: Qfinder Pro search, 3-second reset that keeps data, then a boot without disks.
- QNAP beep codes: one long, two long, three short and one longWhat QNAP NAS beeps mean: one short at start-up, three short plus one long every 5 minutes for a fan failure, two long for degraded mode, and the boot beeps.
- QNAP NAS stuck while booting: disk problem or hardware fault?QNAP NAS stuck while booting and never finishes? QNAP's test is to boot without any disks, then add them back one at a time to find the disk that stops it.
- Qfinder Pro can't find your QNAP NAS: QNAP's checks, in orderQfinder Pro can't find your QNAP NAS? QNAP's checks: did it finish booting (two beeps), then PC firewall, subnets, QuFirewall, virtual adapters, add by IP.
- QNAP "Stopped converting volume" (thick to thin): volume Unmounted, what to doQNAP thick-to-thin conversion stopped and the volume shows Unmounted? QNAP's do-not list, the one safe check it allows, and when to open a support ticket.
- QNAP "File system is not clean." in the System Event Log: what it means and QNAP's fixQNAP System Event Log says "File system is not clean"? What QNAP says causes it, how to run Check File System safely, how long it takes, and what to do next.
- QNAP volume status "Read/Delete": why the volume stopped taking writes and how QNAP says to fix itQNAP volume shows "Read/Delete"? QNAP says the storage pool is full. The free-space thresholds, and QNAP's six ways to free pool space and restore writes.
- QNAP warns an M.2 SSD reached its temperature threshold: what QNAP says to doQNAP says an M.2 SSD hit its temperature threshold? QNAP's fixes: heat sinks, checking the drive's rated temperature, raising the threshold, and QM2 fan checks.
- QNAP: you deleted a shared folder but the storage space did not come backDeleted a QNAP shared folder and got no space back? QNAP says the data stays unless you tick Also delete the data. How to recreate it and remove it fully.
- QNAP NAS drives won't enter standby mode: what keeps them awake and how QNAP says to find itQNAP drives never spin down? QNAP says: enable disk standby, turn off the services and apps that keep drives busy, then run its SSH script to find the cause.
- QNAP NAS with high CPU usage or a slow web interface: how QNAP says to find the causeQNAP web interface slow or CPU high? QNAP says: find the process in Resource Monitor, disable its app to test, clear the browser cache, check for [oom_reaper].
- QNAP HBS 3 job completed with warning or failed: what QNAP says to checkHBS 3 job completed with warning or failed? QNAP says: export the file history CSV, exclude symbolic links, rename skipped files, match the external drive name.
- Can't access QNAP shared folders from Windows File Explorer (SMB): QNAP's checklistCan't open QNAP shared folders in Windows? QNAP's checks: SMB on, SMB versions, folder permissions, QuFirewall, Windows Hello, saved credentials, WS-Discovery.
- Forgot your QNAP NAS password: what QNAP says to doForgot your QNAP NAS password? QNAP: users ask an admin; admins press reset 3 seconds and sign in with the default (Cloud Key, MAC address or admin). Data kept.
- Can't connect to your QNAP NAS remotely through myQNAPcloud: what QNAP says to checkQNAP NAS not reachable remotely? QNAP: update myQNAPcloud Link and apps, re-enable Link, run Diagnostics; Web Connectivity errors mean port forwarding blocked.
- Time Machine backups to a QNAP NAS fail or crawl: what QNAP says to checkTime Machine backups to your QNAP failing? QNAP: SMB 3, a Time Machine folder with read/write; on macOS 26 Tahoe, remove non-ASCII names; use Ethernet if slow.
- QNAP NAS reboots on its own or hangs: QNAP's order of checksQNAP NAS rebooting or freezing? QNAP: restore original memory, disable third-party then QNAP apps, turn off SSD cache, check disk compatibility, run disk tests.
- QNAP firmware update stuck, interrupted or failed: what QNAP says to doQNAP firmware update stuck or failed? QNAP: wait 15 minutes, hold power 5 seconds, update manually; 'digital signature has expired' also needs a manual update.
- Setting up a UPS so your QNAP NAS shuts down safely in a power cutWant your QNAP NAS to shut down safely in a power cut? QNAP: use a listed UPS, enable UPS support, shut down after 3-5 minutes, then unplug the UPS to test it.
- Recovering files you accidentally deleted from a QNAP NASDeleted a file on your QNAP NAS? QNAP says check the Recycle Bin in File Station first, then a snapshot from before the deletion, then your backups.
- QNAP NAS file transfers are slow: how QNAP says to find the causeSlow transfers to or from a QNAP NAS? QNAP: test the network with iperf3 first, then link speed, MTU, scrubbing or backup jobs, the disks and encryption.
- Files on your QNAP NAS encrypted by ransomware: what QNAP says to doFiles on a QNAP NAS encrypted by ransomware? QNAP: cut it off from the internet, restore from a clean snapshot or backup, then close the router ports.
- Expanding a QNAP storage pool by replacing disks with larger ones or adding disksRunning out of space on a QNAP NAS? QNAP: replace each RAID disk with a larger one, one at a time, letting it rebuild, or add free disks to the RAID group.
- External USB drive not showing or not accessible on a QNAP NASPlugged a USB drive into a QNAP NAS and can't see or open it? QNAP: log in as an admin, check File Station, try another port, then grant the user access.
- QNAP NAS email notifications not sending: what QNAP says to checkQNAP NAS not sending email alerts? QNAP: send a test email, check the SMTP settings in a mail app, update past QTS 5.2.4, and restart Notification Center.
- QNAP NAS blocking your computer: IP blocked or 403 ForbiddenCan't reach your QNAP NAS from one computer, or getting 403 Forbidden? QNAP: its IP is probably blocked. Unblock it from another device in Security settings.
- QNAP Qsync not syncing: what each sync error meansQsync not syncing some files? QNAP: check the Sync Errors log, then permissions, name length and characters, files per folder, size limits and Sync Filters.
- QNAP snapshot failed or you can't take snapshots: what QNAP saysQNAP snapshot failed? QNAP lists model and memory limits, the snapshot cap, low storage pool space, high CPU or memory load, and Snapshot Replica ports.
- QNAP App Center not showing apps, or an app won't installQNAP App Center empty or an app won't install? QNAP points to system time, reaching update.qnap.com, a corrupted App Center config, compatibility, or no volume.
- QNAP Wake on LAN not working: settings and unsupported setupsQNAP Wake on LAN not working? QNAP says EuP mode must be off and WOL enabled, and WOL is unsupported on LACP trunks, 10G cards and some 2.5GbE ports.
- QNAP NAS system time wrong: how to sync it with a time serverQNAP NAS clock wrong? QNAP says to sync with a public NTP server. A wrong time breaks logs, schedules, 2-step sign-in, Active Directory and firmware updates.
- QNAP thumbnails not generating, or photos missing in QuMagieQNAP photos showing a generic thumbnail or missing in QuMagie? QNAP lists unsupported formats, missing licenses, indexing, folders, permissions and file size.
- QNAP encrypted shared folder or volume: password forgotten or lockedForgot the password for a QNAP encrypted volume or shared folder? What QNAP says about the key file, data that is still unlocked, and what cannot be recovered.
- QNAP 2-step verification: lost phone or security code not acceptedLost the phone for QNAP 2-step verification, or the security code is rejected? QNAP lists Verify another way, admin disable, and the reset button.
- QNAP Malware Remover alerts: MR1902, MR2102 and repeated warningsGot a QNAP Malware Remover alert like MR1902 or MR2102, or the same warning after every reboot? What QNAP says each one means and the fix it gives.
- QNAP NFS mount fails: access denied, permission denied or protocol not supportedQNAP NFS share won't mount or shows permission denied? QNAP's fixes: enable NFS, set NFS host access per folder, pick a squash option, use the right v4 path.
- QNAP RAID scrubbing: why the NAS is slow and how long it takesQNAP NAS slow while RAID or pool scrubbing runs, or scrubbing restarts after a reboot? What QNAP says scrubbing does, how to schedule it and what interrupts it.
- QNAP port trunking (link aggregation) not increasing transfer speedSet up QNAP port trunking but one PC still copies at 1Gb speed? QNAP explains that trunking adds bandwidth for several clients, not speed for a single one.
- Can't connect to the QVPN server on a QNAP NASVPN clients can't reach the QVPN server on your QNAP NAS? Check the protocol's ports, QuFirewall, router port forwarding and the QVPN version, per QNAP.